基于测高精度最优值的星载分布式InSAR编队构形设计方法

编队构形设计是分布式干涉SAR系统总体设计的关键问题,它必须紧密结合系统性能评价和编队运动规律进行。针对星载分布式干涉SAR的双站、斜视、空间基线等特点,以主星带辅星群分布式InSAR为例,建立干涉测高精度与基线矢量的关系;以直角坐标过渡,建立基线矢量与卫星间轨道根数差的关系,从而建立了测高精度与卫星轨道根数差的关系;以雷达工作的中间时刻达到测高精度最优值为设计准则,得到双星和多星编队设计方法;仿真分析表明根据上述设计方法得到的优化编队构形,其测高性能要优于干涉车轮和干涉钟摆编队。     

武警部队快速机动中最优路径的实现

紧急条件下武警部队快速机动最优路径，是一个多目标多约束随机动态交通网络寻优问题。在分析交通网络拓扑化特点及最短路模型前提下，着重研究道路通行能力带给复杂公路网络道路寻优问题的影响，并结合GIS系统利用改进的Dijkstra算法求解。     

More on the search for an infiltrator

We have asymptotically solved a discrete search game on an array of n ordered cells with two players: infiltrator (hider) and searcher, when the probability of survival approaches 1. The infiltrator wishes to reach the last cell in finite time, and the searcher has to defend that cell. When the players occupy the same cell, the searcher captures the infiltrator with probability 1 ? z. The payoff to the hider is the probability that the hider reaches the last cell without getting captured. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 1–14, 2002; DOI 10.1002/nav.1047     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

某型飞机短周期模态特性分析

对纵向短周期模态方程进行了推导和简化,分析了短周期模态的成因和影响的因素,以某型飞机为例计算了本体的短周期模态参数变化规律,分析了其不足,并提出改进方法并进行了计算验证,得到了较好的结果。     

引入区域量化的相控阵天线维修优化模型

针对大型相控阵天线维修成本高、多部件维修时机难以确定、模型仿真计算困难等问题,提出一种引入区域量化的维修优化模型。建立天线阵列的区域量化模型,将天线阵列维修问题转化成一个由不同区域阵元组成的k/n系统维修优化问题。以使用可用度为约束条件,以单位时间维修费用最小为优化目标,建立引入区域量化的大型相控阵天线多部件视情维修决策优化模型,并通过算例仿真与分析进行了模型验证。结果表明:提出的维修优化模型真实有效,能够很好地解决分布不均匀的相控阵天线维修优化问题。     

一类随机差分方程的解序列的最优停止规则

设报酬序列{x_(?),(?),n≥0}满足随机差分方程x_(n+1)=x_n+a_n+b_nε_(n+1)(ε_1,ε_2,…为白噪声序列)。本文讨论了用有限情形{x_n,0≤n≤N}的Snell包逼近无限情形{x_n,n≥0)的Snell包的条件,得到了x_n=E(x_n|(?))((?)=σ{ε_0,ε_1,…,ε_n},ε_0=0)的Snell包r_n的分解形式和最优停时存在的条件。最后讨论了最优停止规则的迭代计算法,并得出了迭代过程在有限步停止的充分条件。     

坦克火控系统的控制主线及炮控系统

本文提出了控制主线的新概念和坦克火控系统是沿着控制主线而发展的论点.并由此发现,控制主线末端上的炮控系统是火控系统中最薄弱的控制环节,本文以现代控制理论为基础,对炮控系统进行了重新设计,使系统性能有显著改善.     

单位反馈非线性系统的一种辨识方法

用算子符方法及傅里叶变换研究了单位反馈线性系统的一种辨识方法,并给出了辨识算式。     

最小、最大广义最优停止规则的特征

设(X_n,F_n)_1~∞是适应的报酬序列,(γ_n)是相应的snell 包,(A_n)是(γ_n)的Doob-Meyer 分解中零初值的可料增过程。本文继J.Klass 的研究证明了σ_1=inf{K≥1:X_k≥γ_k}是最小半最优的且是最大严格正则的广义规则,而K_0=sup{n≥0:A_n=0}<∞是最大正则的广义规则,从而得出了广义最优规则唯一性的另一表述。